Top Ad unit 728 × 90

random

How to Assembly of the Knot Type Rope Socket

This article will talk about how to assembly knot type slickline Rope Socket, this is the most important thing for slickline operator. Because with out making the rope socket, slickline operator can't do their job.

How to assembly of the Knot Type slickline Rope Socket before slickline Operation.

[post_ad]
After rig up and make up slickline PCE, slickline operator have to make a new knot of rope socket. This is the preparation and step by step procedures to assembly the Knot Type slickline Rope Socket :
Holding the wire taut, start bending the wire about the disc
Illustration, doc. IndustriMigas

  • Pass the end of the wire through the stuffing box and then pass the end of the wire through the slickline Socket body, spring and spring support.
  • Place the disc in a vice and run the wire down between the jaws behind the disc, then bend the end of the wire into a loop to form a handle that will be comfortable to grip. The disc should contact the wire approximately 10 in. to 12 in. from the loop.
  • Grip the long end of the wire (the end connected to the drum) by wrapping it around your left fore arm (I fright - handed) and the handle with your right hand.
  • Holding the wire taut, start bending the wire about the disc(a). The wire should go around the disc once, then be wrapped around it self making sure the reps a minimum of slack in the wire when starting to wrap. These wraps should be made smooth and even and should hug the wire closely with the coils touching one another.
Continue wrapping in this manner until about 12 coils are made. Move the wire in the direction shown in order to twist off the free end
Illustration, doc. IndustriMigas

  • Continue wrapping in this manner until about 12 coils are made. Move the wire in the direction shown in order to twist off the free end (b). Be careful to keep the loop pointed in the same direction or slightly twisted during this part of the operation, so that the torque is focused on the end of the last coil. The wire should twist off (c). Place the disc cross wise in the vice or pliers and straighten the Knot as well as possible.
The Socket is now ready to be attached to the upper end of the stem
Illustration, doc. IndustriMigas

  • Now using the wire, pull the Knot into the socket and check to see that the socket swivels freely.
  • The Socket is now ready to be attached to the upper end of the stem.
How to Assembly of the Knot Type Rope Socket Reviewed by Djoernalist on 10:46 AM Rating: 5

1 comment:

  1. Hello, my name is Aisha Nayla, prey to fraud at the hands of fake lenders. I lost around Rp300,000,000 because I needed a large capital of Rp300,000,000,000. I almost died, I had no place to go. my trade was destroyed, and in the process I lost my child and mother. I can't stand this incident anymore. Last week I met an old friend who introduced me to a good mother, Mrs Christabel Missan Loan Investment Company, which finally helped me get loan of  Rp500,000,000,000 loan

     Good mother, I want to take this opportunity to express my gratitude, and may God continue to bless the good mother Christabel Missan and my friend. I also want to use this opportunity to give advice to fellow Indonesians, that there are a lot of fraudsters there, so if you need a peace and security loan and anyone who needs an urgent loan should be quick, contact Christabel Missan via email christabelloancompany@gmail.com
    You can still contact the mother whatsApp number +15614916019

    You can also contact me by email: (aishanaylad@gmail.com). And you can still contact my friend who introduced me to a good mother loan company, Lady Liliyana, email: liliyanabasuki@gmail.com if you are in doubt. help him the only person who can be trusted and can be trusted.

    ReplyDelete

Thank you for visit and read this post. Share this post if you like it.
Leave your comment on this text box

All Rights Reserved by IndustriMigas | #1 Oil and Gas Blog © 2019 - 2020
Powered By Blogger, Designed by Sweetheme

Contact Form

Name

Email *

Message *

www.industrimigas.com. Powered by Blogger.